Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item Page: 1 of Page 2: Technical Specifications For technical questions and replacement parts, please call It is important that you read the entire instruction sheets to become familiar with this product before using it. Page 3: Additional Safety Warnings 2.
Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Our Company. Our Commitment to Excellence. Mission Statement. Manufacturing Certifications. Manufacturing Capabilities. Media Finish. Remove bolt assemblies C. Position vise and re-install as pictured in Fig. Additional blades in 4-, 6-, 8- and tooth sizes are available. The choice of the blade pitch is governed by the thickness of the work to be cut; Page 8: Blade Track Adjustment Oil co.
Material loose in vise 1. Clamp work securely Breakage 2. Incorrect speed or feed 2. Adjust speed or feed 3. Blade teeth spacing too large 3. Replace with a smaller teeth spacing 4. Material too coarse blade 5. Incorrect blade tension 4. Fasten the lift handle to the smaller hole in the middle wheel bracket using the bolt and hex lock nut which you pre-assembled earlier. Fasten the lift handle to the larger hole in the wheel bracket using a M8 x 30 hex bolt, the shoulder spacer, a M8 hex lock nut.
Page 6: Maintenance To Increase depth of spike point penetration, add weight to the tray as necessary. The tray holds concrete blocks or patio blocks at approximately 35 lbs. Secure the weight with straps or wire using the tray flange. If the ground is extremely hard and dry, it should be sprinkled or watered down for one to two hours prior to the aerator. Description Qty.
0コメント